ceiling speaker

It will be a great selection for installing the ceiling speakers if you want to have a system with the performance sound without affecting the look and the feel of the space that you are living. Through this article, we’d like to share with you the necessary information in order to set up your own ceiling speakers. In particular, there are what you need and the skills for your project. Here are…

The In-Ceiling Speakers – What You Should Know

Plan & Prepare

Both are the successful key for installing. It is not difficult to ensure the practical side as long as it fits your system. Nonetheless, the good preparation will enable you to recognize the risks so that you can avoid before ending up with the non-fit holes in the wall or ceiling. Sense is made to start your project before deciding to buy the speakers. In this way, you can ensure the chosen speakers that are suitable for your installing position.

The Placement of the Speakers

In the preparation, the essential element will determine your system placement. It means in the majority of the cases. The purpose is to find the balance between the visual discretion and the final performance. Depending on everyone, the balance in installing is different. Basically, it is based on the size of your room and individual preference. Aside from that, some people also consider the performance of the sound when installing.

For the stereo speakers, you need to set up the equal distance from the listening location yours. This one is similar to the surround speakers. It is noticed that the subwoofers may be put anywhere in your room.

The speaker placement

Saying to the in-wall speakers, it forces you to have to mount in the internal wall while the outside of the wall is stone and brick. Correspondingly, mounting the speakers will be impossible. Nevertheless, if you equip the wall brackets or anchors, you can mount the wall speakers on the outside of the wall.

Have you decided the position that you want to install the speakers? Well, investigating the wall structure used to mount the speakers is necessary. Apart from, the position of the battens or the studs needs to be determined by the finder. For the in-ceiling speakers, it needs to mount them in the middle of two studs.


When mentioning to the wiring running, you can choose to run the in-wall wiring or the out-of-wall wiring. Running the external wiring is simpler. The cables of the speaker can run along the wall surface and you can use the furniture to hide them, the carpets, example. Or even, using the small clips is also a good idea. On the other hand, the in-wall wiring needs a lot of preparations. The inside of the wall must route the cable. It needs many studs for the rear of the plasterboard.

The Necessary Things for You

Listing the tools, it isn’t likely short of AC power cables, a stud finder to position the studs, and the pipes. In additional to that, a driller and a drywall saw will be necessary. Plus, the wire strippers is never excessive.

Relating to the skills, you have to be able to cut drywall and patch any visible holes. In coming, we will give the fundamental guidelines, determining the position of the studs, for instance. However, if you feel doubt your own skill, you can hire an installer. An idea is not bad, right?

Staring to Install

before installing

Are you ready to install after you have picked up the suitable position and completed the preparation? In fact, your chosen location is viable, isn’t it? Well, the next step is to utilize the stud finder in order to check the rear of the wall and ensure that an AC power cable or the pipes of water doesn’t also have in the installed position of your speaker.

The position of the joists or studs has to be considered a careful way as long as there has in accordance with the space between the ceiling speakers or the in-wall speakers, especially, the closest one is an intermediary point among both as possible. Yes, this one is valuable so as to try locating the position of the joists/ studs because you can recognize it based on the change of the sound while passing over it. Of course, we cannot make sure something behind the wall if we don’t try drilling. Nonetheless, it will be better if we recognize it without needing to drill.

Once the ceiling or wall is checked through your observation and with the stud finder, you can create a small hole via the surface to make the exploring space. Then, it utilizes a piece of wire to prod the rear of the wall and recognize the obstacles. Don’t drill too fast! Like that, you can timely react in a case of detecting the hidden pipe in the wall. To make sure the safety, you ought to turn off the supplied power source.

You avoid cutting into the ceiling or the wall until the pilot holes are drilled for the position of the speaker. Once you discover any problems on the thrown locations, you should consider your layout way. There is your case, right? So, you should only fill a small hole instead of filing a whole speaker-sized one.

Fit the Speaker

speaker fits in place

All drilled pilot holes are wide, high, and deep enough to mount the speakers, aren’t they? So, you can cut into your wall. The starting is to drill a hole in a corner. Continuously, you utilize a drywall saw in order to cut an entire piece and keep the tidy cavity. Are you cutting on the surface that is plastered or painted? To minimize the cracking, you ought to sketch out the first cavity on the surface.

For the time being, when you determine the right size in your wall, you can run the wiring and set up the speaker based on the guidelines of the manufacturers. You should also be careful when adjusting the speaker frames fitting the place. Before fixing the grills of the speakers into the right position, you should listen to the system yours.

Paint & Complete

Necessarily, the grilles and frames of the speakers need to be painted so as to blend them as long as it fits in place. When doing this, you must be careful to avoid painting on the drivers of the speaker. If possible, you ought to utilize a spray paint to apply for the grilles, along with the light coats. It makes sure that you will not worry about clogging the grille holes. It recommends that you should dilute with the ratio – 5:1. Like that, you can get a smooth as desired. In case you aren’t sure about your painting unit, you must consult the guide of the manufacturer.

It wishes that this article will be able to help you avoid some involutions in the installation.